Dwarf Wall
Robinsons 8x10 Dwarf Wall Greenhouse
This new Robinsons Dwarf Wall range of attractive models, available in green, white or mill finish, has been designed to fit on a single skin dwarf wall - 1' 11.5/8" (600mm) high.

A choice of five model widths and a variety of modular lengths are available.

Robinsons can provide you with a greenhouse suitable for building onto a 600mm high dwarf wall and will provide all the necessary drawings for your chosen builder to construct the footings and build a single brick wall with its doorway. The bricks used should be of good quality and not sand faced.
Alternatively your local agent may be able to quote you or recommend a builder.

Dwarf Wall Specifications
Six models are available based upon the following dimensions, in any of our standard lengths:
Regent 6' 5.3/4" (1.976m) wide The greenhouse shown is a green Royale 8 x 10 model with optional staging, shelving, louvre and ridge cresting and finials. The dwarf wall in this example has a semi-engineering brick course below ground, seven courses of LBC Tudors and a top course of Class A engineering blue bricks.
Royale 8' 6.1/4" (2.596m) wide
Rosette 10' 7" (3.226m) wide
Regal 12' 7" (3.836m) wide
Riviera 8' 6.1/4" (2.596m) wide
Lean-To 5' 4" (1.625m) wide
Eaves and Ridge height are 3.1/4" (84mm) higher than the standard models (excluding Riviera).
Partitions available on all models except the Regent, Riviera and Lean-Tos.
The standard Dwarf Wall Greenhouse is available on the complete Robinsons range (excluding Renaissance) and consists of:
Sliding Lockable Door(s) - Level door threshold - Opening Roof Vents and automatic openers (dependent on model length) - Eaves Guttering with integral Downpipes - Ridge cresting and finials (white and green only) - Unique capping and stainless steel fixings - PLUS 4mm Toughened Safety Glass throughout.